Stop Moisture Where It Starts.
Don't just cover the dirt. The foundation walls are the #1 entry point for moisture. Seal concrete and block permanently with the Anabec System.
Get Contractor Pricing →Why Most Crawl Space Jobs Fail
If you only install a vapor barrier on the floor, you are leaving the door open for moisture.
Bad Air Travels Up
Up to 50% of the air in a building comes from the crawl space or basement. If the foundation is damp and moldy, the offices upstairs will be too. You can't fix IAQ without fixing the hole in the bottom of the boat.
Block Walls Act Like Sponges
Cinder blocks (CMU) and concrete are porous. They suck water out of the ground constantly. This keeps the crawl space humidity at 90%+, which feeds mold growth on the wood joists above.
Plastic Sheeting Isn't Enough
Laying plastic over the dirt is good, but it does nothing for the walls. Moisture will bypass the plastic and enter through the masonry. You must seal the structure itself.
The Complete Sealing Protocol
Address the walls, the floor, and the wood framing above for a permanent solution.
Clean. Seal. Protect.
Designed for damp, dark environments where regular paint peels off.
Clean the Masonry
You can't seal a dirty wall. Use Advanced Cleaning Solution Plus to remove dirt, mud, and organic stains from the block. This ensures the sealer actually sticks.
Seal the Walls (X90)
Apply Anabec X90. This is a thick, white barrier that fills the holes in cinder blocks. It stops the "sponge effect" and creates a bright, clean surface you can inspect.
Protect the Wood (X70)
Don't forget the floor joists above. Spray them with Anabec X70 (clear) to lock out moisture and prevent future mold growth.
Why Regular Waterproofing Paint Peels
Standard "drylok" type paints often act like a plastic bag. When water pushes from the outside (hydrostatic pressure), the paint bubbles and peels off in sheets.
Anabec X90 is different. It bonds *into* the concrete, not just on top of it. It creates a barrier that stops liquid water but still "breathes," so it won't blister or lose adhesion.
- High-Build: Thick enough to fill rough cinder block pores.
- Breathable: Won't peel when the ground gets saturated.
- Bright White: Instantly transforms a dungeon into a clean workspace.
Coverage & Application
Apply easily with an airless sprayer (0.017-0.019 tip). On rough block, back-rolling is recommended to ensure a pinhole-free barrier.
Contractor FAQs
Do I really need to clean the block first?
Can I just spray the walls and ignore the wood above?
Is this a vapor barrier?
Win High-Value Encapsulation Bids
Offer a permanent solution for commercial crawl spaces and basements. Request the technical protocols and contractor pricing below.
Request Pricing & Protocols
Get certified applicator pricing for X90/X70 and the technical specifications for foundation encapsulation.
