HELPING CONTRACTORS
GROW THEIR REPUTATION FOR OVER 26 YEARS!
(800) 369-8463
HOME
ABOUT US
PRODUCTS
COMMERCIAL CLEANING PRODUCTS
Advanced Cleaning Solution Plus
Anasphere Plus™ - Disinfectant, Fungicide, Mildewstat & Virucide
Anafresh - Odor Neutralizer
MOISTURE BARRIERS
X70 - Moisture Barrier Solution
X90 - Moisture Barrier & Mold Stain Remover
NewBuild 50 - Commercial Moisture Barrier
ANABEC FLAME & FIRE RETARDANT (AFFR)
SYSTEMS STAIN REMOVER (S.S.R.)
CONTRACTORS
ANABEC, INC. PRODUCT TRAINING
ANABEC, INC. WARRANTIES
ANABEC, INC. ACCOUNT SETUP/CREDIT APPLICATION
CONTACT US
FIND A CONTRACTOR
DISTRIBUTORS
MEDIA
TESTIMONIALS
Test
Call Us - Office Phone
Call Us - Toll Free
APPLICANT INFO & TEST
First Name*
Last Name*
Email*
Phone Number*
Mobile Number
Fax Number
Company Name*
Address*
City
State*
Zip*
Comments:
1.1 Which Product is the cornerstone of the Anabec, Inc. of Products?*
Advanced Cleaning
x70
Anasphere Plus
NewBuild 50
1.2 For cleaning and disinfecting finished building surfaces what products should be use? (2 answers)*
Advanced Cleaning Solution
x70
Anasphere Plus
x90
1.3 It is important to first clean the surface using Advanced Cleaning Solution before applying a disinfectant or barrier product*
True
False
1.4 Which Anabec, Inc. product is sold as a concentrate?*
Advanced Cleaning Solution
Anasphere Plus
NewBuild 50
x70
1.5 For new construction, what product is used?*
1.6 What product is also a hospital grade disinfectant that treats infectious organisms such as Norovirus, H1N1, MRSA and HIV?*
1.7 What is the minimum temperature for application of Anabec, Inc. products?*
20 degrees F
32 degrees F
40 degrees F
60 degrees F
1.8 Which Anabec, Inc. products can be fogged (2 answers)?*
Advanced Cleaning Solution
Anasphere Plus
x90
NewBuild 50
1.9 Which products are ideal primers for latex paint? (3 answers)*
Advanced Cleaning Solution
Anasphere Plus
x70
x90
NewBuild 50
1.10 What Anabec, Inc. products are suitable for cleaning and disinfecting surfaces (2 answers)?*
Advanced Cleaning Solution
Anasphere Plus
x70
x90
1.11 What are the best ways to determine a construction materials compatibility with the Anabec, Inc. products?*
Contact the Product Manufacturer
Start a research project
Contact Anabec, Inc.
Contact the EPA
2.1 Why does bleach not work for mold remediation?*
It neutralizes too quickly
It leaves excessive water behind
It does not have enough contact time
All of the above
2.2 What should you do with sensitive objects, incompatible materials, artwork, electronics, etc., before applying any Anabec, Inc. products in a mold remediation setting? (2 answers)*
Remove from work area
Leave in place and don't worry
Cover & wrap tightly with poly
Throw away
2.3 What conditions are ideal for mold growth? (3 answers)*
Cold
Hot
Dry
Humid
Sunny
Dark
2.4 Prior to starting a mold remediation project what step do you complete first?*
Repair the condition that created excess moisture
Inform the EPA
Notify your competition
2.5 Before treating contaminated building materials their moisture levels should be between:*
0-5% moisture
16-20% moisture
25-50% moisture
>50% moisture
2.6 If moisture levels in building materials are too high what should be done?*
If possible, bring in fresh air
Use air movers to circulate air
Setup dehumidifiers
Remove wet material
All of the above
2.7 Why is containment necessary when disturbing mold contamination?*
2.8 Anabec, Inc. promotes brushing and vacuuming away visible mold and debris before application of the Anabec, Inc. products:*
True
False
2.9 Briefly describe why and when you need to HEPA vacuum during remediation activities:*
2.10 Negative air should be turned off during fogging*
True
False
2.11 Which personal protective equipment is appropriate for most mold remediation projects?*
Full body coverall (Tyvek Suit)
Gloves
Respirator
All of the above
2.12 What should you use to clean your spraying equipment?*
3.1 To remediated unfinished wnfinished surfaces (brick, block, uood, unpainted walls) which products must be used when an Anabec, Inc. warranty is being offered? (2 answers)*
Advanced Cleaning Solution
Anasphere Plus
x70 or x90
NewBuild 50
3.2 When Advanced Cleaning Solution and x70 or x90 are used in a mold remediation setting how long a warranty is available?*
3 years
10 years
30 years
50 years
3.3 What type of pre/post testing is required for remediation warranty issuance?*
Qualitative Air Testing
Quantitative Air Testing
Qualitative Surface Testing
Quantitative Surface Testing
3.4 How many pre tests and post tests should be taken for a 500 SF remediation work area?*
1 pre / 1 post
3 pre / 3 post
5 pre / 5 post
7 pre / 7 post
3.5 How many pre tests and post tests should be taken for a 1000 SF remediation work area?*
1 pre / 1 post
3 pre / 3 post
5 pre / 5 post
7 pre / 7 post
3.6 How many pre tests and post tests should be taken for a 3000 SF remediation work area?*
1 pre / 1 post
3 pre / 3 post
5 pre / 5 post
7 pre / 7 post
3.7 Where should post test be taken?*
Different areas than pre-test
Same areas as pre-tests
Outside the work area
3.8 Why must you wait to take post-tests?*
3.9 What 3 items must be submitted from each project in order for Anabec, Inc. to issue a warranty? (3 answers)*
Copy of Project Contract
Completed Warranty Form
Laboratory Surface Tests
Air Sampling Results
Jobsite Photos
3.10 What obligations are the building owner under to maintain the written Warranty?*
3.11 What should a contractor do if a customer calls with a Warranty claim?*
4.1 NewBuild 50 is used...*
After remediation of mold from building materials
As a moisture barrier for new wood framing & sheeting
On freshly painted walls
As a carpet protector
4.2 How long is the shelf life of NewBuild 50 from the date of purchase?*
1 month
1 year
18 months
2 years
4.3 What is the average rate of coverage of NewBuild 50?*
4.4 When NewBuild 50 is applied to new building materials how long of a warranty is available?*
3 years
10 years
30 years
50 years
4.5 When is testing required for new construction warranty issuance?*
Before application of NewBuild 50
After application of NewBuild 50
Testing is not required
4.6 What type of testing is required for new construction warranty issuance?*
Qualitative Air Testing
Quantitative Air Testing
Qualitative Surface Testing
Quantitative Surface Testing
After I pass the test, I would like to be added on Anabec's "Locate A Contractor" map*
Yes, please use the address from beginning of test
Yes, please use address I will provide below
No
Enter the address you would like used on the "Locate A Contractor" map here:
I would like to receive informational and promotional e-mails from Anabec, Inc.:
Yes
No
E-mail Address I would like used: (If different from above)
How did you hear about Anabec, Inc.?*
Facebook
Google
Yahoo
Other Search Engine
Another Contractor
Trade Show
Other
If you selected "Other":
Thank you for taking the Application test.
We will get back to you as soon as possible with your results. We look forward to partnering with you!
Oops, there was an error sending your message.
Please try again later.
Follow Us
Web Design
by
LocalEdge
, all rights reserved
Sitemap
Anabec, Inc.
Address:
9393 Main Street,
Clarence, NY 14031
Office Phone:
(716) 759-1674
|
Toll Free:
(800) 369-8463
|
Office Fax: (877) 241-8560
Share by: